Product Description
Renishaw PH10T PLUS Probe Head
The new PH10T PLUS motorized probe head allows complete, rapid, and repeatable inspection of most complex components with minimum human intervention. Full orientation of your TP2, TP6, TP20 or TP200 probe between any of 720 positions, under manual or program control, turns your 3 axis CMM into a 5 axis machine.
- The PH10T PLUS is a motorised indexing head that mounts and re-orientates the probe repeatably to any one of 720 positions at 7.5° increments
- Controlled by the PHC10-3 PLUS
- All M8 thread probes can be fitted directly onto the mount of the PH10T PLUS
- The AM1 adjustment module (fitted between the head and the shank) corrects the alignment of the PH10T PLUS to the machine
| Length | 103 mm excluding AM1 |
| Width | 62 mm |
| Weight | 645 g |
| 2σ positional repeatability | 0.4 μm |
| Cycle time(90° move) | 3.5 seconds |
| Total angular movement | A axis 105° to 0° in 7.5° steps = 15 positions B axis ±180° in 7.5° steps = 48 positions |
| Total number of positions | 720 |
| Maximum extension bar length | 300 mm using PEL4 extension* |
| Head Mounting | Shank to suit your CMM |
| Probe mounting facility | M8 thread (2-wire) |
| Probe head control | PHC10-3 PLUS (purchased seperately) |
* On all the PH10 PLUS series of probe heads, it is possible to extend beyond 300 mm using our range of CF extensions.
Part Number: A-5863-2000
