Product Description
SP25
The SP25 is actually two sensors in one! - enabling the user to SCAN for form measurement or reverse engineering and TOUCH-TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw's TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application.
The probe is just 25 mm in diameter, compatible with Renishaw's PH10M/MQ, PH6M and PHS1 probe heads, can also be mounted using a multi wired extension bar. Together these combinations permit excellent reach and access to part features.
SP25M Scanning Probe Kit #3 (entry level kit)
Includes:
- 1 x SP25M probe body
- 1 x SM25-3 scanning module kit (see below)
SM25-3 scanning module kit (A-2237-1103)
Includes:
- 1 x SM25-3
- 2 X SM25-3
| Physical measurement range | ±0.5 mm deflection in all directions in all orientations |
| Physical overtravel range | X,Y: ±2.0 mm +Z: 1.7 mm -Z: 1.2 mm |
| Resolution | Capable of < 0.1 μm |
| Spring rate | 0.6 N/mm to 0.2 N/mm - dependent on stylus length |
| Dimensions | ∅25 mm x length dependent on module used |
| Mass | SP25M body: 65 g SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus) SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus) SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus) SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus) |
| Mounting | Multiwired autojoint connection:
|
| Signal Outputs | Non-linear and non-orthogonal analog outputs - rate, gain, and resolution are not fixed |
| Interface | AC3 card |
Renishaw Part number: A-2237-1003
