Product Description
Renishaw M4 Stainless Steel Tool Datuming Cube Stylus (32.5 mm)
Tool setting styli are fitted with a precision ground tip to ensure high squareness and parallelism.
Tool Datuming Styli
The tolerances to which tools can be set depends upon the flatness and parallelism of the stylus tip to the machine axis. Fine adjustment is provided on all probes and probe holders to allow these settings to be achieved. Where rotating tools are to be datumed for diameter the tools must be rotated in reverse to the cutting direction.
Stainless Steel
Stylus stems manufactured from stainless steel are used widely for styli with ball/tip diameters of 2 mm or greater and with lengths up to 30 mm. Within this range, one-piece steel stems offer the optimum stiffness to weight ratio, giving adequate ball/stem clearance without compromising stiffness with a joint between the stem and threaded body.
Please contact us if you require any styli with special ball materials. We can recommend the most suitable material for scanning different materials.
Part number: A-5000-6403
