Product Description
RMP60
RMP60 is a radio transmission part probing system ideal for use on all machine tools. RMP60 features an integrated probe module delivering exceptional robustness and generous overtravel. RMP60 complies with FCC regulations and operates in the 2.4 GHz range. RMP60 delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum). RMP60 supports three methods of probe activation: Radio-on The probe is turned on via an RF signal produced by the RMI-Q and initiated by an M code. The probe is turned off via an RF signal or the internal timer. Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer. Switch-on The probe is turned on and off via a switch incorporated into the shank, activated when the probe is loaded into the spindle.
| Sense directions | ±X, ±Y, ±Z |
| Stylus overtravel | X and Y: ±18° Z: 11 mm (0.43 in) |
| Stylus trigger force | X and Y: 75 gf - 140 gf Z: 530 gf |
| Unidirectional repeatability | 1.0 μm (0.00004 in) |
RMP60 Retrofit Kit
Includes:
- RMP60 probe and transmission system
- RMI-Q radio machine interface
- Receiver mounting bracket
- 50 mm and 100 mm ceramic styli
- Sealtite kit
- Renishaw Inspection Plus software
- Installation and applications support
A shank is not included in this kit. See section entitled Shanks and Toolholders for price and part number information.
Part number: RMP60-NS-S (Available at a fixed price)
Call for details
Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit order can be processed.
