Product Description
RMP600
RMP600 is a radio transmission probe using strain gage technology. Measuring only 63 mm in diameter and 76 mm in length, with an omni-directional transmission distance of 15 m, it is ideal for use on all machine tools. RMP600 features an integrated probe module delivering exceptional robustness and generous overtravel. It delivers interference free transmission through the use of FHSS (frequency hopping spread spectrum). RMP600 complies with FCC regulations and operates in the 2.4 GHz range.
RMP600 supports three methods of probe activation:
Radio-on:The probe is turned on via an RF signal produced by the RMI-Q and initiated by an M code. The probe is turned off via an RF signal or the internal timer.
Spin-on: The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer.
Switch-on: The probe is turned on and off via a switch incorporated into the shank, activated when the probe is loaded into the spindle.
| Sense directions | ±X, ±Y, ±Z |
| Stylus overtravel | X and Y: ±15° Z: 11 mm (0.43 in) |
| Stylus trigger force | X and Y: 20 gf Z: 193 gf |
| Unidirectional repeatability | 0.25 μm (0.00001 in) |
RMP600 Retrofit Kit
Includes:
- RMP600 probe
- RMI-Q radio machine interface
- Receiver mounting bracket
- 50 mm and 100 mm carbon fiber styli
- Sealtite kit
- Renishaw Inspection Plus software
- Installation and application support
A shank is not included in this kit. See section entitled Shanks andToolholders for price and part number information.
Part number: RMP600-NS-S (Available at a fixed price)
Call for details
Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit order can be processed.
