Product Description
High Precision Pull Down Arm (HPPA)
The HPPA is a manual "pull down / push up" tool setting system for use on CNC lathes. It is designed to permanently reside in the machine envelope.
When needed, the HPPA is manually "pulled-down" into position. After use the arm is "pushed-up" away from the cutting volume.
All HPPA systems are supplied with an enclosure to protect the probe and stylus assembly when not in use. HPPA hubs are available in both R/E (rear exit) and S/E (side exit) configurations. S/E hubs are supplied with a fixed 5 m cable. R/E hubs are supplied with a bulkhead connector and require the purchase of a separate cable.
Specifications
| Unidirectional repeatability max 2σ value in machine XZ axis | 5.0 μm (0.0002 in) for arms supporting 6 in to 15 in chucks 8.0 μm (0.0003 in) for arms supporting 18 in to 24 in chucks |
| A-dimension | 335 mm |
| B-dimension | 298 mm |
HPPA is available to fit most common chuck sizes from 6 to 24 in.
HPPA RP3 Kit (10 in S/E)
Includes:
- Arm
- HPPA hub
- RP3 probe
- 90° probe holder
- TSi2 interface for HPPA
- Probe enclosure
- Cable (supplied with S/E systems only, purchase separately for R/E systems)
Part number: A-2275-0190
* A stylus assembly is not included and must be ordered separately.
